94 Chapter 10
Routine Maintenance
Cleaning The Roller
Clean the paper feed rollers if paper is not fed properly. Cleaning the paper feed rollers will wear
the rollers, so perform this only when necessary.
1 Press [ON/OFF] to turn ON the machine, then remove any paper from the Auto
Sheet Feeder.
2 Clean the paper feed rollers.
(1) Display the Maintenance screen.
(2) Use [ ] or [ ] to select <Roller cleaning>, then press [OK].
The confirmation screen is displayed.
(3) Use [ ] or [ ] to select <Yes>, then press [OK].
The paper feed rollers are cleaned.
3 Repeat step 2 twice.
4 Open the Paper Output Tray.
5 Load three or more of A4- or Letter-sized paper in the Auto Sheet Feeder.
6 Repeat step 2 three times.
The sheet of paper is automatically fed in and then out of the machine.
Note
If there are no signs of improvement after performing three times,
contact a Canon service representative.
