38
XP662 MANUAL Airplane
CHAPTER 7: FUNCTIONS (FUNCTION MODE)
•
Airplane
The amount of servo travel is adjustable for each
direction for each of the six channels individually.
The adjustment range is from 0% to 150%. Travel
adjustment is factory set at 100% for all channels.
The travel adjustment value displayed on the screen
depends on the position of the stick or switch (e.g.,
flap switch, gear switch). This function is useful
either to maximize control surface travel, or to
reduce travel to eliminate servo binding without the
need for mechanical adjustment.
1. Turn on the transmitter.
2. Press the SCROLL and INCREASE buttons
simultaneously to enter the function mode.
3. Press the SCROLL button until “TRV ADJ.”
appears on the screen.
4. Press the CHANNEL button until the desired
channel appears on the screen.
5. Move the selected channel stick or switch in the
direction that you want to adjust the travel. Press
the INCREASE or DECREASE button to achieve
the desired travel. Move the stick in the opposite
direction to adjust the travel in the opposite direction.
6. The same may be done for all channels.
7. Press the SCROLL button to access the aileron-
to-rudder mixing function.
8. To exit, press the SCROLL and INCREASE
buttons simultaneously.
