A SERVICE OF

logo

55
XP662 MANUAL Helicopter
FUNCTION MODE
CHAPTER 5: INPUT MODE AND FUNCTION
Helicopter
5.3
To enter the Function mode, turn on the transmitter.
Press the SCROLL and INCREASE buttons
simultaneously until a beep is heard. The display will
change accordingly and show the last active
function. Press the SCROLL button to scroll down
through the functions one by one as shown in the
flowchart at right. Once the appropriate function is
selected, use the CHANNEL button to select the
appropriate channel. Use the INCREASE and
DECREASE buttons to adjust the values displayed
on the screen.
THR
-
REV•NORM
SERVO REVERSING Page 67
DUAL RATE Page 68
EXPONENTIAL Page 69
SUB-TRIM
Page 70
TRAVEL ADJUSTMENT
Page 71
THROTTLE HOLD Page 72
PITCH CURVE (NORMAL)
Page 73
PITCH CURVE (STUNT)
Page 73
PITCH CURVE (HOLD)
Page 73
THROTTLE CURVE (NORMAL)
Page 74
THROTTLE CURVE (STUNT)
Page 74
REVOLUTION MIXING Page 75
PROGRAMMABLE MIXING A
Page 76
CCPM SWASHPLATE MIX
Page 79
I00
%
AIO
D/R
0
%
AIO
EXP
+I00
%
THR
TRV ADJ
HLD
0
0F
PLN
0
%
PLS
MIX
0
%
PLH
0
%
TLN
0
%
TL5
0
%
RVU
0
%
AII
MIX
0
%
CCP
MIX
OF
THR
SB-TRIM
MIX
Only visible when throttle
hold function is activated