39
XP662 MANUAL Airplane
On some types of aircraft, it is desirable to mix
aileron and rudder to make coordinated turns. The
XP662 allows the mixing of aileron-to-rudder and
allows you to adjust the amount and direction of
mixing. The aileron-to-rudder mixing can be left on
all the time, or it can be turned off with the selection
of one of three switches.
1. Turn on the transmitter.
2. Press the SCROLL and INCREASE buttons
simultaneously to enter the Function mode.
3. Press the SCROLL button until “MIX A-R”
appears on the screen.
4. Press the CHANNEL and INCREASE button to
set the desired amount and direction of aileron-
to- rudder mixing.
Note: If “OF” appears on the screen, it is
because the aileron to rudder mixing switch
is in the off position.
Accessing the Aileron-to-Rudder Mixing Function
AILERON-TO-RUDDER MIXING
7.6
Press the SCROLL
button until “MIX A-R.”
appears on the screen.
Press the CHANNEL and INCREASE
buttons simultaneously to set the aileron
to rudder mixing direction.
Press the INCREASE or
DECREASE button to set the
aileron to rudder mixing value.
