CHAPTER 6: FUNCTIONS (SYSTEM MODE)
•
Helicopter
The XP662 gear/gyro switch selection function
enables the dual rate values of the gyro to be
combined with one of four switches (flight mode,
throttle hold, aileron dual rate, elevator dual rate).
This feature is for use with gyros that offer a dual rate
sensitivity adjustment, such as the JR G460T Piezo
Gyro (JRPG460T). The most common use for this
feature would be to combine the gyro dual rate
adjustment with the flight mode switch. This would
then automatically alter the gyro sensitivity from
normal (hover) to flight (forward flight) when the
flight mode switch is in use.
1. Press the SCROLL and INCREASE buttons
simultaneously and hold.
2. Turn on the transmitter to enter the system mode.
3. Press the SCROLL button until “GER” appears on
the screen.
4. Press the INCREASE or DECREASE button to
select the switch you prefer to use for the
operation of the gyro sensitivity.
5. Press the SCROLL button to access the Model
Selection function.
6. To exit, press the SCROLL and INCREASE
buttons simultaneously.
Note: The remote gain lead from the gyro should be
plugged into channel 5 (gear) of the reciever.
GEAR/GYRO SWITCH SELECTION
6.4
Press the SCROLL button until
“GER”appears on the screen.
Press either the INCREASE or DECREASE
buttons to select the switch you prefer to use
for the operation of the gyro sensitivity.
