A SERVICE OF

logo

Open as PDF
next previous
67
XP662 MANUAL Helicopter
Accessing the Servo Reversing Function
THR: THROTTLE
AIL : AILERON
ELE : ELEVATOR
RUD: RUDDER
GER: GEAR/GYRO
PIT : PITCH (HE ONLY)
CHANNEL
1
2
3
4
5
6
REV
◆
NORM
THR
–
+
MODE
ENTER
CHANNEL INCREASE
CLEAR
DECREASE
Press the INCREASE or DECREASE
button to change the servo direction.
Press the MODE
button until
REV
◆
NORM
appears on the
screen.
Press the
CHANNEL button
until the desired
channel appears
on the screen.
Left Right
High Pitch / Throttle
Low Pitch / Throttle
Left Right
Back
Forward
Forward
Back
Left Stick Direction (Mode II)
Left (Tail Rotor)
Up (More Pitch)
Down (Less Pitch)
Right (Tail Rotor)
Right Stick Direction (Mode II)
Left (Aileron)
Forward (Elevator)
Back (Elevator)
Right (Aileron)
Servo reversing is a very convenient function used in
the setup of a new aircraft. It is used to change the
direction of servo rotation in relation to the
corresponding stick movement. Servo reversing is
available for all six channels.
1. Turn on the transmitter.
2. Press the SCROLL and INCREASE buttons
simultaneously to enter the Function mode.
3. Press the SCROLL button until “REV-NORM”
appears on the screen.
4. Press the CHANNEL button until the desired
channel appears on the screen.
5. Press the INCREASE or DECREASE button
to change the servo direction.
6. Press the MODE button to access the Dual
Rate function.
7. To exit, press the MODE and CHANNEL
buttons simultaneously.
SERVO REVERSING
7.1
CHAPTER 7: FUNCTIONS (FUNCTION MODE)
•
Helicopter
CHANNEL
SCROLL
INCREASE
DECREASE
ENTER
Press the INCREASE or
DECREASE button to change
the servo direction.
Press the CHANNEL button
until the desired channel
appears on the screen.
Press the SCROLL button
until “REV/NORM”appears
on the screen.