In this manual you will find in-depth instructions that
detail all the steps and procedures you should follow in
order to program each of the XF662’s features. For
modelers who want to get into the air fast, we have
provided Quick Start. Quick Start covers the basic
programming information necessary to get you airborne.
Later, when you want to learn more about specific
features of the XP662, turn to the appropriate page(s) in
this manual for more detailed programming information.
If AC appears on the screen procede directly to
Step 4.If HE appears press the INCREASE or
DECREASE button until “AC”appears, then
press the SCROLL and INCREASE buttons
simultaneously to store the model type change.
Press the SCROLL and INCREASE
buttons simultaneously and hold
while turning on the transmitter.
Press the SCROLL button until
“TYP”appears on the screen.
Turn the transmitter off and then on again.
Digital Trim Settings
Check to ensure that the aileron, elevator, and
rudder trim values are set to the 0 (neutral) position.
Next, set the throttle value to the full low (-40)
position by pressing the throttle trim lever down.
1 2
3 4
5
6
With the transmitter on, press the
SCROLL and INCREASE buttons
upward simultaneously until a
beep is heard.
