41
XP662 MANUAL Airplane
Elevator-to-flap mixing is commonly used to quicken
the pitching rate of an aircraft. This is very popular in
fun fly airplanes because it allows tighter loops.
Normally, with up elevator the flaps go down, while
down elevator makes the flaps go up.
1. Turn on the transmitter.
2. Press the SCROLL and INCREASE buttons
simultaneously to enter the function mode.
3. Press the SCROLL button until “MIX E-F” appears
on the screen.
4. Press the CHANNEL and INCREASE buttons
simultaneously to set the elevator-to-flap
mixing direction.
5. Press the INCREASE or DECREASE button to
set the elevator-to-flap mixing value.
Accessing the Elevator-to-Flap Mixing Function
ELEVATOR-TO-FLAP MIXING7.7
Press the SCROLL
button until “MIX E-F.”
appears on the screen.
Press the CHANNEL and INCREASE
buttons simultaneously to set the elevator
to flap mixing direction.
Press the INCREASE or
DECREASE button to set the
elevator-to-flap mixing value.
