Milestone XProtect Smart Client 3.0; User’s Manual
www.milestonesys.com Page 12 Introduction
Installation Differences
The Remote Client can be installed on the remote user’s computer, or the user can connect to the
Milestone XProtect Enterprise server and run the Remote Client straight from the server.
The Smart Client must always be installed on the remote user’s computer.
System Requirements
Operating System Microsoft Windows 2000 Professional, Windows 2000 Server and
Advanced Server, Windows XP Professional (32 and 64 bit) or
Windows Server 2003 (32 and 64 bit)
CPU Intel P4 or higher (Xeon recommended for large views), minimum
2.4 GHz.
RAM Minimum 512 MB (1 GB recommended for large views).
Network Ethernet, 100 Mbit or higher recommended.
Graphics Card AGP or PCI-Express, minimum 1024×768 (1280×1024
recommended), 16 bit colors.
Hard Disk Space 50 MB free.
Software Microsoft .Net 2.0 Framework and DirectX 9.0 or newer required.
Tip: To check which DirectX version is installed on a computer, click Start, select Run..., and
type dxdiag. When you click OK, the DirectX Diagnostic Tool window will open; version information
is displayed near the bottom of its System tab. Should the computer require a DirectX update, the
latest versions of DirectX are available from http://www.microsoft.com/downloads/.
