136
Restoring the Backup Settings to the Camera
This function enables you to restore the camera backup settings saved on a PC
disk to the camera.
Important
Note
• When this function is executed, all the other current camera settings
are erased.
■ For Windows
A Connect the camera correctly to the PC and set the camera’s
mode dial to [ ]. Then turn the camera and the PC on.
B Select [Windows Explorer] under [Programs] in the [Start] menu.
Explorer will start up.
C Click on the [RDC-i700] icon with the right button and select
[Restore RDC-i700 setting...] from the menu displayed.
The dialog box for selecting the file for downloading will be displayed.
D Select the file and then click on [Open].
The selected settings are now transferred to the camera.
E Turn off the camera and turn it on again about 5 seconds later.
You can now use the camera with the transferred settings.
Note
• In this section, the explanation uses the method of clicking with the
right button, but the function can also be selected from the Explorer
[File] menu.
