38
Displaying Thumbnail Images with Capture Guide Titles
This operation enables you to view images recorded according to an Image
Capture Guide List (hereafter referred to as Guide List).
Note
• Instructions for creating the Guide List or shooting operation from the
camera’s homepage, refer to page 97 “Using JOB Navi. Image
Capture Guide List”.
Viewing Thumbnail Images with
Guide List
You can display the images with Guide List recorded with the camera in
thumbnail form. There are two types of thumbnail display, normal THUMBNAIL
and FILE PROPERTY which displays the information in more detail.
A Check that the camera is properly connected to the PC, that the
camera and PC are turned on, and that the camera’s mode dial is
set to [ ].
B Start the browser from the PC, input the IP address and display
the camera’s home page.
See
• P.28 “Opening the Camera Homepage on the Browser”
C Click on [VIEW IMAGES with CAPTURE GUIDE TITLE].
After a short while, the data recorded in the internal memory will be displayed in
thumbnail form (it may take a while for the data to be transmitted from the
camera).
