84
Direct Upload Settings
This section explains how to set the folder and server for the dial-up account
and send-to account for direct upload.
Note
• For details of how to use the direct upload, refer to “Sending an Image
Directly to a Computer” in the ‘Communication/Internet’ operation
manual.
• For details of the settings, refer to “Setting Direct Upload” in the
‘Communication/Internet’ operation manual.
• For details of how to set the PC to receive direct upload, refer to
“Setting the Computer to Receive Direct Upload” (P.148).
Displaying the Direct Upload Dial-Up Accounts
This function enables you to display the list of dial-up accounts for direct upload
set in the camera.
A Check that the camera has been properly connected, that the
camera and the PC are turned on, and that the camera’s mode dial
is set to [ ].
B Start up the browser by the PC, input the IP address and display
the camera’s homepage.
See
• P.28 “Opening the Camera’s Homepage on the Browser”
C Click on [SET-UP].
D Click on [DIRECT UPLOAD].
