A SERVICE OF

logo

Open as PDF
next previous
74
Template Settings
This section explains how to set the templates which are useful for character
input such as e-mail etc.
Note
• For details of how to use the templates, refer to “Specifying a
Template” in the ‘Communication/Internet’ operation manual.
Displaying the Templates
This function enables you to display the list of templates stored in the camera
(internal memory).
Operations such as editing, deleting and adding a template start from this
screen.
A Check that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the camera’s mode dial
is set to [ ].
B Start up the browser by the PC, input the IP address and display
the camera’s homepage.
See
• P.28 “Opening the Camera’s Homepage on the Browser”
C Click on [SET-UP].
D Click on [TEMPLATE].