A SERVICE OF

logo

70
Modem Settings
This section explains how to set the modem loaded in the PC card slot of the
camera (or connected to the camera).
Note
For details of the modem settings, refer to Checking the Modem
Settings in the Communication/Internet operation manual.
A Check that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the cameras mode dial
is set to [ ].
B Start up the browser by the PC, input the IP address and display
the cameras homepage.
See
P.28 Opening the Cameras Homepage on the Browser
C Click on [SET-UP].
D Click on [MODEM SETTING].