3.8 Store Data Operation
The data storage feature allows the unit to store measurement data for up to 500
readings. (Refer to Sec. 5.4 to activate.)
There are four basic operations of the store data function that can be utilized in
the store data function.
• Group Selection - group tagging allows you to assign group numbers to the
stored values. Group tagging is only accessable through RCI with a software
package such as SpectroStart.
• Send data - allows all of the stored data to be transferred to a computer or
serial printer. Data is sent as determined by the function displayed and modes
enabled.
• Delete last - allows only the last measurement data to be deleted from stored
memory.
• Clear all - causes all of the measured data in stored memory to be deleted.
The following sample (made in XYZ absolute) illustrates the different functions
of the data storage feature.
MEASUREMENT
1) Press [FUNCTION] to select XYZ
measurement space.
2) Measure first sample.
"READING XYZ C
2
" is momentarily
displayed, then the measurement.
Upon release of the read head,
"DATA STORED 1 OF 500" and then
the measurement is displayed.
FUNCTION ILLUM
DIF
CAL
PRESS
X 4 . 1 2
Y 2 . 8 7 Z 2 . 4 1
X Y Z
C
2
XYZ C
2
X 3.41
Y 3.47 Z 4.25
DATA STORED
1 OF 500
READING XYZ
2
C
XYZ C
2
X 3.41
Y 3.47 Z 4.25
23
