X-Rite 948 Manual

A SERVICE OF

next previous

7. Changing Apertures

X-Rite has three different aperture kits available for the 948 & 968, and they are

listed below.

• 8mm/4mm Aperture Kit P/N 968-100-08

• 8mm UV Excluded Aperture Attachment P/N 968-61-08E

• 20mm Aperture Kit P/N 968-100-20

Each aperture kit includes the aperture, sensor nose, extra target windows, and a

specially designed aperture wrench.

APERTURE INSTALLATION

1) Unscrew the two thumb screws [1], then remove the nose piece [2].

2) To install the 4mm aperture attachment; screw the 4mm aperture attachment [3]

onto the 8mm aperture [4]. The 4mm aperture attachment must be screwed on

finger tight; then advance to Step 6 on following page.

To install the 8mm or 20mm aperture; advance to Step 3.

[1]

[4]

[3]

[2]

47