Store Data Operation . . . continued
DELETE LAST MEASUREMENT
6) Press [DIF] to delete the last
measurement made (this step can
be repeated to delete several of the
last measurements).
If "NO" is selected, press
[FUNCTION] and advance to Step 7.
CLEAR ALL DATA
7) Press [DIF] to clear all stored
measurement data taken.
If "NO" is selected, press
[FUNCTION] to return to normal
operation.
> The Send/Clear data function may
be exited at anytime by pressing
[FUNCTION] and [ILLUM] at the
same time.
> Refer to Section 5.4 to activate
the store data function.
> "STORAGE FULL" will display on
all measurements after 500 stored
measurements has been reached
NO
2 YES
LAST DELETED
DELETE LAST ?
PRESS
NEXT
STEP
NO
1 YES
DELETE LAST ?
Number of Measurements Stored
NO
2 YES
DATA CLEARED
PRESS
NORMAL
CLEAR ALL ?
XYZ C
X 3.45
Y 3.52
Z 4.29
2
OPERATION
25
