A SERVICE OF

logo

8.3. Battery Replacement
1. Set the 948/968 on it’s side and lock shoe in place. The shoe must be locked.
2. Slide battery access door [1] toward bottom of unit and remove.
3. Disconnect plug [4] and pull battery pack [2] out of unit.
4. Remove old AA NI-CAD batteries [3], and install six fresh AA NI-CAD
(recognizing proper polarity).
5. Slide battery pack [2] into unit, and reconnect battery plug [4]. Reinstall
battery access door [1].
6. Unlock shoe.
7. Unit should be charged for 24 hours after new battery installation is performed.
Batteries P/N SE15-19 (6 Required)
[1]
[3]
[2]
[3]
[4]
51