Filter
Top Products
ENGLISH
15
En
PROGRAMMED PLAY
Up to 32 tracks can be programmed from the loaded disc.
r,t
c
s
c/d
s
i/k
0-9,+10
ENTER
C
PRGM/
RANDOM
r,t
1
Press PRGM/RANDOM on the remote control once
in stop mode.
"PROGRAM" appears on the monitor screen and
"PRGM" flashes on the display.
2
Within 5 seconds, press ENTER.
The program screen is displayed on the monitor screen and
the display.
Monitor screen:
PROGRAM
SELECT TRACK
TOTAL TRACK TIME
ENTER:MEMORY
CANCEL:CLEAR
PROGRAM:EXIT
c
:PLAY
0 0 0 : 00 : 00
EDIT PROGRAM
ik
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
00
i
UP
k
DOWN
Display:
3
Press the numbered button(s) or i/k on the
remote control to select the track to be played first.
Using the numbered buttons:
To select track 12, press +10, 2.
To select track 20, press +10, +10 and 0.
Using i/k:
Press i for a larger track number and k for a smaller track
number.
Monitor screen:
PROGRAM
SELECT TRACK
TOTAL TRACK TIME
ENTER:MEMORY
CANCEL:CLEAR
PROGRAM:EXIT
c
:PLAY
0 0 0 : 00 : 00
EDIT PROGRAM
ik
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
**
10
i
UP
k
DOWN
4
Press ENTER.
The selected track number is listed in order on the monitor
screen, and lights up on the display.
The number of programmed tracks and the total playing time is
also indicated at the bottom of the monitor screen.
If you entered a wrong number
Press C.
The last programmed number is canceled. Then enter the
correct number.
5
Repeat steps 3 and 4 to program other tracks.
6
Press c to start play.
To cancel programmed play
Press PRGM/RANDOM twice.
"OFF" is displayed on the monitor screen. Programmed play is
canceled, and the unit continues to play the current and all
succeeding tracks in the disc.
To stop programmed play
Press s.
The unit remembers the point at which play stopped, and resumes
programmed play from this point when c is pressed.
To clear the point to be resumed
Press s once again after stopping programmed play.
The resume memory is cleared, and plays from the first
programmed track when c is pressed.
To clear the program
Press s twice after stopping programmed play.
The program will also be cleared when the disc door is opened.
To continue programming a new set of tracks, press ENTER and
repeat from step 3.
To check the program
Call up the program screen on the monitor screen.
Alternatively, press t in stop mode.
With each press, the program number and the track number are
shown progressively on the display.
To add a track to the program
Before playing, repeat steps 1 to 4. The track will be programmed
after the last track.
To delete a track from the program
1 Press PRGM/RANDOM repeatedly so that "PROGRAM"
appears on the monitor screen. Then press ENTER within 5
seconds.
2 Press C.
The last track in the program is deleted.
To cancel the programmed play mode
Press PRGM/RANDOM twice.
NOTE
• Direct selection of a track with the numbered buttons cancels
the programmed play mode.
• If random play mode is activated during programmed play, the
programmed play mode is canceled.
• You cannot program more than 32 tracks. (Even if you attempt to
program a track after programming 32 tracks, the track is not
programmed but the 32 tracks already selected remain in the
program.)
AUDIO CD
OPERATIONS
Total playing time of
programmed tracks
Total number of
programmed tracks