Filter
Top Products
En
ENGLISH
47
DISC RESUME
"Disc Resume" sets whether the disc resume memory is retained
after power off, opening of the disc door, or switching of the function.
After these operations, play starts either from the previous stopped
point (ON), or from the beginning of the disc (OFF).
Note that setting "Disc Resume" to OFF does not turn off the
resume play feature itself. For the resume function, see
"STOPPING AND PAUSING", page 19.
The default setting is "OFF".
1 Select "Disc Resume" by using i/k in the setup menu.
Then press ENTER.
2 Use i/k to move the cursor to "ON" or "OFF".
Choice The Item
ik
ENTER : Choice item
SETUP : Completion
RETURN : Previous menu
1
2
Disc Resume
Disc Resume
O N
O F F
Disc Resume
3 Press ENTER.
Your entry is saved.
4 Press SET UP to exit the setup menu.
When "Disc Resume" is set to ON
When a disc is loaded, the unit checks whether it holds the resume
memory data for the disc. If so, "RESUME" is displayed on the
screen before the unit enters the stop mode.
In this condition, play starts from the previous stopped point by
pressing c.
To start play from the beginning temporarily while "Disc
Resume" is set to ON
Press s in stop mode and then press c to start play. "RESUME
OFF" is displayed in this case.
NOTE
• The unit maintains the resume data of up to 5 DVDs and up to a
total of 10 audio CDs and video CDs.
• When the 6th DVD disc or the 11th audio CD or video CD is
inserted, the resume data for the oldest disc is overwritten by
the disc information of the new disc and deleted, even when
"Disc Resume" is set to ON.
PBC
"PBC" sets your preferred setting to turn the PBC (PlayBack
Control) function for video CDs on or off.
The default setting is "ON".
1 Select "PBC" by using i/k in the setup menu. Then press
ENTER.
2 Use i/k to move the cursor to "ON" or "OFF".
Choice The Item
ik
ENTER : Choice item
SETUP : Completion
RETURN : Previous menu
1
2
P B C
P B C
O N
O F F
PBC
3 Press ENTER.
Your entry is saved.
4 Press SET UP to exit the setup menu.
CUSTOMIZING
DVD SETUP