Filter
Top Products
ENGLISH
33
En
PRESETTING STATIONS
r,t
c
s
s
a
0-9,+10
BAND
SHIFT
a
r,t
TUNER/
BAND
The unit can store up to a total of 32 preset stations. When a
station is stored, a preset number is assigned to the station. Use
the preset number to tune in to a preset station directly.
1
Press TUNER/BAND to select a band, and press
r or t to select a station.
2
Press a to store the station.
A preset number beginning from 1 in consecutive order for each
band is assigned to the station.
3
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
NOTE
"FULL" is displayed if you attempt to store more than 32 preset
stations.
Preset number
RADIO
RECEPTION
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1
Press BAND while pressing SHIFT to select a band.
2
Press numbered buttons 0-9 and +10 to select a
preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Then, press c repeatedly.
Each time c is pressed, the next ascending number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
s, and press a within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.