Filter
Top Products
2-6
A Guide to TracVision C3
11.Reposition the mounting plate over the drilled
mounting holes, lining up the the mounting plate
holes with the holes in the mounting surface.
Apply a bead of silicone sealant around each of
the six mounting holes on the top surface of the
mounting plate.
12. Place the antenna unit on top of the mounting
plate, making sure all holes are aligned.
13. (Optional) For convenient storage, the shipping
restraints may be rotated 180º and secured to the
mounting bolts (see Figures 2-6 through 2-8).
Forward
Shipping Restraint
Rotating Plate
Shipping Restraint
Rotating Plate
Shipping Restraint
Figure 2-8
TracVision C3 Shipping Restraints
(Storage Position)
Forward Shipping Restraint
Installation Bolts and Washers
LNB
Figure 2-6
Forward Shipping
Restraint Storage
Installation Bolt and Washer
Rotating Plate Shipping Restraint (1 of 2)
Figure 2-7
Rotating Plate Shipping
Restraint Storage