Filter
Top Products
KA9233 User Manual
8
Rack Mounting
1. Remove the 2 stacking brackets from the sides of the unit. This requires
using a Phillips head hex screwdriver to remove the 8 screws that attach
the stacking brackets to the unit.
2. Remove the 4 screws from the sides and bottom at the front of the unit.
Using the screws provided with the rack mount kit, attach the rack mount
brackets to the sides of the unit (as shown in the figure below). There are
two sets of screw holes on the rack mount brackets so that the KA9233 can
be rack mounted either flush with the rack or with the front panel
protruding.