Filter
Top Products
KA9233 User Manual
28
(continued from previous page)
1. Choose the settings you wish, and then click Save.
2. To exit without saving changes, click any other menu or icon.
Setting Function
Change
Password
Enter the old account password. Enter a new password, and then
reenter the password to confirm it. Or, do not enter anything to
leave the password unchanged.
OSD Activation Selects which hotkey combination is used to return to the Graphical
OSD from within the matrix KVM switch ports:
[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
Since the Ctrl key combination may conflict with programs running
on the computers, the default is the Scroll Lock combination.
Set Logout
Timeout
This function allows you to specify the number of minutes to elapse
before an inactive user is timed out of the OSD. If there is no input
from the user for the specified amount of time, the user will be
logged out automatically. The valid range is from 1–180 minutes.
Enter 0 (zero) to disable the Logout Timeout function. This function
is disabled by default.
Screen Blanker If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30
minutes, and then press [Enter]. Enter 0 (zero) to disable the
Screen Blanker. This function is disabled by default.
Hotkey
Command
Enables or disables Hotkey mode in case a conflict with programs
running on the computers occurs. Hotkey mode is On by default.
(See Hotkey Mode, page 31.)
Set Beeper When set to On, the KA9233 beeps when switching ports, when
activating Auto Scan mode (see page 23), when switching ports in
Auto Scan mode, when exiting Auto Scan mode, or when an invalid
entry is made on an OSD menu. The beeper is On by default.
Set Idle Timeout If there is no input from the console accessing a particular port for
the amount of time set with this function, the port is released,
allowing it to be accessed by the other consoles. The valid range is
from 1–240 seconds. Enter 0 (zero) to disable the Idle Timeout
function. The default is 5 seconds.
Restore User
Default
Restores the original factory default settings for View Mode (OSD),
Set Port ID, Display Duration, Set Scan, OSD Activation, Set
Logout Timeout, Screen Blanker, Hotkey Command, Set
Beeper, and Set Idle Timeout.