Filter
Top Products
KA9233 User Manual
10
Installation
Follow these steps to install your new KA9233 Combo Graphic Console
Module:
1. Connect your monitor and PS/2 or USB keyboard and mouse to the CON-
SOLE ports on the KA9233. Each port is marked with an identifying icon.
2. (Optional) Use the provided KVM cable to connect a computer to the
LOCAL PC port.
3. Use Cat 5 cable to connect the LINK port on the KA9233 to a user port on
the rear panel of the matrix KVM switch.
4. Connect the power adapter to an AC mains power source appropriate for
your model, and then connect the power adapter cable to the KA9233. You
will hear a long beep and the LED indicators on the front panel will
illuminate for a moment.
5. If you connected a computer to the LOCAL PC port, you may turn it on
now.