Filter
Top Products
KA9233 User Manual
40
Click View Only to allow the IP Installer to be used to view the IP
address, subnet mask, and gateway for the matrix KVM switch.
Click Disabled to restrict the IP Installer from being used to view or
change the network settings for the matrix KVM switch.
IP Address
You can manually enter a static IP address or use a DHCP server to
dynamically assign an IP address.
To use a DHCP server to assign an IP address:
1. Under DHCP Enabled, click Ye s to use a DHCP server.
To manually assign an IP address:
1. Under DHCP Enabled, click No.
2. In the fields under Manual IP Address, enter the IP address, subnet mask,
default gateway, and primary DNS server. You also can enter an alternate
DNS server; however, it is not required.
Note: If you use a DHCP server to assign an IP address to the matrix KVM
switch, you should also enable Mail Notification so that you will be
notified whenever the IP address changes.
Port Settings
Enter the network ports that the matrix KVM switch will use to transfer
Webpages and communicate with clients that access the KM0832
Administrator Utility. Typically, Port 80 is used for Hyper Text Transfer
Protocol (HTTP) communications, while Port 443 is used for HTTPS (HTTP
over Secure Socket Layer).
Note: You must assign a port number for each field. Otherwise, the KM0832
Administrator Utility will not function correctly.