Filter
Top Products
29
AXIS 243Q Blade - Pan Tilt Zoom
Preset positions
Select presets from the drop-down Source list on the Live View page. These will move
and/or zoom the camera to a pre-defined position, to cover an area of particular interest.
Events can also be configured to go to preset positions when triggered. For information on
setting up preset positions, please see Preset positions,
on page 26 and the online help.
Guard tour
A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined
order or at random, and for configurable time periods. A guard tour sequence will continue
to run after the user has logged off or closed the browser.
Advanced
The Device Settings options relate to driver-specific settings; so the appearance of this
window can vary depending on the driver installed. Options that can be configured
include: Driver Specific Settings for Video Source 1, Mechanical Limits for Moving
Video Source 1, Light Control for Video Source 1, and Extended Driver Specific Settings
for Video Source 1.
The Contr
ol settings window contains tools for creating and saving short command
buttons that are located under the Control panel. These buttons provide direct access to
various built-in auxiliary commands provided by the PTZ driver and are displayed in the
PTZ Panel.
Limits
- Define the pan, tilt, zoom and focus limits for the AXIS 243Q Blade. Movements
to the left and right, up and down can be restricted to narrow the area under surveillance.
The near focus limit can be set to avoid focusing on objects too close to the camera.
Note:
To be able to set limits, the driver needs to be an “absolute” driver.’