Filter
Top Products
46
AXIS 243Q Blade - System options
SNMP
The Simple Network Management Protocol (SNMP) allows the remote management of
network devices. Select the version of SNMP to use, depending on the level of security
required. Select the version of SNMP to use, by checking the appropriate box. The three
levels of security are:
• SNMP V1 - includes no security
• SNMP V2c - uses very simple security
, e.g. community name as password
• SNMP V3 - provides encryption and secure
passwords. Use with HTTPS.
If using V1 and V2c, enter the community name for read-only access to all supported
SNMP
objects (except the root password and other objects that require write access).
Default value = public. You can also specify the community name for read/write access to
all supported SNMP objects (except read-only objects). Default value = pass.
If using HTTPS enter the password if it has not already been set. T
o set the password again,
the AXIS 243Q Blade must be reset to the factory default settings.
UPnP™
The video server includes support for UPnP™. UPnP™ is enabled by default, and the video
server then is automatically detected by operating systems and clients that support this
protocol.
RTP / MPEG-4
These settings are the IP address, port number, and Time-To-Live value to use for the
media stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers
should be used for multicast streams. For more information, please see the online help .
Bonjour
The AXIS 243Q Blade includes support for Bonjour. When enabled, the video server is
automatically detected by operating systems and clients that support this protocol.
Ports & devices
I/O Ports - the pinout, interface support and control and monitoring functions provided by
this connector are described in I/O Terminal connector,
on page 50.
RS485
- The COM port on the AXIS 243Q Blade supports several operational modes. For
more information, please see RS-485 COM port,
on page 52.