Filter
Top Products
49
AXIS 243Q Blade - Resetting to the factory default settings
Resetting to the factory default settings
This will reset all the parameters in all 4 units (including all four IP addresses) to the
factory default settings.
1. Disconnect power.
2.
Press and hold the Control button and reconnect power.
3. Release the button when the
Status Indicator displays red (this
may take up to 15 seconds). When
the Status Indicator changes to
Green (may take up to 1 minute),
the process is complete and the
AXIS 243Q Blade has been reset.
4. Re-assign the IP addresses, using
one of the methods described in
this document.
To reset an individual unit to the original factory default settings, use the button provided
in that
unit’s web interface. For more information, please see the online help.
Control button
LED Indicators