Filter
Top Products
the disc is reloaded, the “LAST” indicator will again
light. To begin play at the memorized location,
press “Last” on the remote control while the disc is
stopped.
Nearly all DVDs will automatically begin playing
when loaded. Be sure to press the “Stop” button
before pressing the “Last” button.
Pressing “Play” will begin playback at the start of
the disc.
Please note that the “Last” button on the remote
control corresponds to the “Condition Memory”
function on the DX-7.
To clear the “Last Memory” location, press the
“Sleep” button to activate the “Clear” function while
“Last Memory” is displayed in the on-screen display.
“Last Memory” is only displayed for a few
seconds after the DVD is loaded. To clear the
“Last Memory” location at any time, press “Last
Memory” to mark a new location, and then press
the “Sleep” button to activate the “Clear”
function.
Condition Memory Function
The “Condition Memory” function allows you to
memorize four settings for each of up to 15 DVDs.
These settings comprise:
•
Soundtrack
•
Subtitle
•
Angle
44
INPUT