Filter
Top Products
This setting only affects the “Compressed + PCM”
output. The “PCM Only” output will always
convert an MPEG audio soundtrack to
two-channel PCM.
Digital Output
The digital audio output may be turned off for
diagnostic purposes. It is normally recommended to
set this option to “On”.
This setting affects both the “Compressed +
PCM” output and the “PCM Only” output.
Audio 2
The Audio 2 setup tab only contains a single menu
option. This is not a one-time setting to match your
system, but rather an adjustment that can be made
to the audio playback.
“Audio DRC” stands for “Audio Dynamic Range
Compression”. Normally this option should be set
to “Off”. However, if you are watching a film late at
night and wish to avoid disturbing other members
of your household, then Audio DRC may be turned
on. Soft sounds such as dialog can then be heard
more clearly without increasing the volume of the
loud sounds.
Audio DRC only applies to discs with a Dolby
Digital soundtrack.
53
Audio1 Audio2 GeneralLanguageVideo
96kHz PCM Out – 96kHz
MPEG Out – MPEG PCM4
Dolby Digital Out – Dolby Digital
DTS Out – DTS
Move
Exit
SETUP
Digital Out
Off
On
Audio1 Audio2 GeneralLanguageVideo
Move
Exit
Medium
Off
High
Low
SETUP
Audio DRC