Filter
Top Products
MV 4105_Ciprico Inc. 4-7
MediaVault 4105 User Manual Installation
Daisy Chaining
MV 4105 units include a hub feature, which allows up to 4 units to be daisy
chained (if each of the units is equipped with a hub). The unit at the end of
the chain does not require a hub.
The built-in hub can be identified by looking at the back of the unit and at
the Fibre Channel connections. The LEDs are located between the two
Fibre Channel ports, as shown in Figure 4-5.
FIGURE 4-5. Built-In Hub, Showing the LEDs Located Between the Fibre Channels.
Hub Description
Table 4-5 describes the function of each hub LED. See Figure 4-5 for the
location of the Fibre Channel ports and LEDs.
TABLE 4-5. Built-In Hub LEDs.
LINK LED Indicates that communications are established between the Fibre
Channel microprocessor inside the MV 4105 and the built-in hub of
the MV 4105.
SYNC LED FC speed is established between the built-in hub portion of the
MV 4105 and the device to which this port is connected.
ACTIVE LED Data is being transmitted.