Filter
Top Products
MV 4105_Ciprico Inc. 8-7
MediaVault 4105 User Manual Maintenance
NOTE: Rebuild (reconstruction) times vary, depending on the
system’s work load. When the system is idle the rebuild time is
approximately 16.5 Gbytes/minute (that is, it takes approximately
60 minutes to rebuild 1TByte).
NOTE: The service LED stays illuminated and the RAID 3 LED blinks.
After the rebuild process is finished, the drive LEDs and service LED
go off.
9. As a precaution, after the rebuild (reconstruction) process is finished,
power-down the array.
10. Power-up the array.
11. Power-up the host computer.