Filter
Top Products
Operations MediaVault 4105 User Manual
5-12
MV 4105_Ciprico Inc.
Mode Change Procedure
To change the mode, perform the following.
1. Turn off the computer.
2. Select a mode.
3. Set the mode number at the Mode Select buttons, located at the rear of
the MV 4105. See Figure 5-3. Use a pointed object (such as a pen tip)
to press the desired Mode Select button.
• Press the upper button to decrease the mode number.
• Press the lower button to increase the mode number.
FIGURE 5-3. Mode Select Buttons.
4. Turn off power to the MV 4105.
5. Press and hold the MODE SET button (see a description of the button on
page 5-13)
6. Apply power to the MV 4105.
7. Keep holding down the button until two beeps are heard to confirm the
mode change.
8. Release the MODE SET button.
Press
to change
to change
Press