Filter
Top Products
MV 4105_Ciprico Inc. 7-3
MediaVault 4105 User Manual Problem Solving
LED(s) stuck on immediately
on power up
Indicates that a controller is not
getting power.
Can be caused by loose power
connector to controller,
defective controller, or
defective power supply.
Contact Ciprico Inc. technical support
for further instructions.
Immediate continuous tone
(high-pitched) on power-up
Indicates that the controller
either isn't getting proper power
or that the controller failed., or
that there is a possible power
supply failure.
Can be caused by any of the
above problems, or that the
power supply is not functioning
properly.
Contact Ciprico Inc. technical support
for further instructions.
Other Hardware Failure Includes:
- LED failure
- Beeper failure
- Switch failure
- A problem inside the chassis.
Contact Ciprico Inc. technical support
for further instructions.
TABLE 7-1. Problems, Likely Causes, and Recommended Solutions.
Issue/Problem Likely Causes Recommended Solutions