Filter
Top Products
Maintenance MediaVault 4105 User Manual
8-2
MV 4105_Ciprico Inc.
Disk Drive Module Replacement
Removing, replacing, and rebuilding a disk drive module consists of four
inter-related procedures. Perform these four procedures in sequence:
1. “Power-Off the Host Computer and MediaVault Unit” (see below)
2. “Remove the Front Panel” (see page 8-3).
3. “Remove the Disk Drive Module” (see page 8-4).
4. “Install and Rebuild a Disk Drive Module”. Rebuild the disk drive
module, depending on whether the disk drive failed in RAID 0 mode
(see page 8-5) or RAID 3 mode (see page 8-6).
Power-Off the Host Computer and MediaVault Unit
Before removing and replacing any components from the MV 4105,
perform the following:
1. Power-off the host computer (PC or Macintosh).
2. Power-off the MV 4105.