Filter
Top Products
Maintenance MediaVault 4105 User Manual
8-4
MV 4105_Ciprico Inc.
Remove the Disk Drive Module
1. Identify the disk drive module to be replaced, by locating the slow
blinking light next to it.
2. Shutdown the host computer and turn off the MV 4105.
3. Push down on the button of the disk drive to be removed. The handle
pops-up automatically.
4. Lift the handle while pulling forward on the disk drive. See Figure 8-2.
Gently pull it forward. Set the defective disk drive module aside.
FIGURE 8-2. Handle and Button at the Disk Drive Modules.
5. Perform the install and rebuild process. See page 8-5.
Handle
Button