Cisco Systems 15.2(2)JB Universal Remote User Manual


 
CHAPTER
6-1
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
6
Configuring Radio Settings
This chapter describes how to configure radio settings for the wireless device. This chapter includes the
following sections:
Enabling the Radio Interface, page 6-2
Configuring the Role in Radio Network, page 6-2
Point-to-point and Multi Point bridging support for 802.11n platforms, page 6-5
Configuring Radio Data Rates, page 6-8
Configuring MCS Rates, page 6-11
Configuring Radio Transmit Power, page 6-12
Configuring Radio Channel Settings, page 6-16
Configuring Location-Based Services, page 6-22
Enabling and Disabling World Mode, page 6-24
Disabling and Enabling Short Radio Preambles, page 6-25
Configuring Transmit and Receive Antennas, page 6-26
Enabling and Disabling Gratuitous Probe Response, page 6-27
Disabling and Enabling Aironet Extensions, page 6-28
Configuring the Ethernet Encapsulation Transformation Method, page 6-29
Enabling and Disabling Reliable Multicast to Workgroup Bridges, page 6-29
Enabling and Disabling Public Secure Packet Forwarding, page 6-30
Configuring the Beacon Period and the DTIM, page 6-32
Configure RTS Threshold and Retries, page 6-32
Configuring the Maximum Data Retries, page 6-33
Configuring the Fragmentation Threshold, page 6-33
Enabling Short Slot Time for 802.11g Radios, page 6-34
Performing a Carrier Busy Test, page 6-34
Configuring VoIP Packet Handling, page 6-34
Viewing VoWLAN Metrics, page 6-35
Configuring ClientLink, page 6-42
Debugging Radio Functions, page 6-42