Filter
Top Products
13-14
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Chapter 13 Configuring RADIUS and TACACS+ Servers
Configuring and Enabling RADIUS
To disable accounting, use the no aaa accounting {network | exec} {start-stop} method1... global
configuration command.
Selecting the CSID Format
You can select the format for MAC addresses in Called-Station-ID (CSID) and Calling-Station-ID
attributes in RADIUS packets. Use the dot11 aaa csid global configuration command to select the CSID
format. Table 13-1 lists the format options with corresponding MAC address examples.
To return to the default CSID format, use the no form of the dot11 aaa csid command, or enter
dot11 aaa csid default.
Note You can also use the wlccp wds aaa csid command to select the CSID format.
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
aaa accounting network start-stop
radius
Enable RADIUS accounting for all network-related service requests.
Step 3
ip radius source-interface bvi1 Configure the access point to send its BVI IP address in the
NAS_IP_ADDRESS attribute for accounting records.
Step 4
aaa accounting update periodic minutes Enter an accounting update interval in minutes.
Step 5
end Return to privileged EXEC mode.
Step 6
show running-config Verify your entries.
Step 7
copy running-config startup-config (Optional) Save your entries in the configuration file.
Table 13-1 CSID Format Options
Option MAC Address Example
default 0007.85b3.5f4a
ietf 00-07-85-b3-5f-4a
unformatted 000785b35f4a