Filter
Top Products
NX501/NZ501
31
English
English
Owner’s Manual
11. USB VIDEO OPERATIONS
This system can play USB video files (MP4,3GP, etc)
stored in an USB memory which is recognized as “USB
Mass Storage Class device” You can use your USB
memory as an audio device by simply copying desired
audio files into it.
Note:
• This system will not operate or may operate improperly
with some USB memory.
• Files protected with any DRM cannot be played.
Notes on using USB memories
General notes
When no support files, the file list display nothing.
Notes on the folder structure
The limitations on the folder structure are same as
those in USB Audio Player mode.
Notes on the Tag titles
The limitations on the Tag titles are same as those in
DVD Audio Player mode.
Select USB Video mode
Connect your USB memory with video files to the USB
connector. The system will automatically detect the
connected device, and the [USB Video] button on
main menu will be enabled.
• When an USB memory is already connected
Touch [USB Video] button on main menu to select the
USB Video mode.
The system changes to the USB Video mode and
starts playback from the previous position or from the
beginning.
NOTE: If you reconnect the same device that you
disconnected last, the system will play back where it left
off.
Playing video files in USB memory
If the video is playing, touch the screen of the playing
video to display Operation buttons.
* The display will return to the playback screen, if you
do not touch the screen for 10 seconds.
1-Previous Track Button
2- Play/Pause Button
3- Next Track Button
4-Elapsed playing time indicator/Seek bar
5-Menu Button (Go to list menu mode)
6- Repeat Button
7- System time
8- Bluetooth status
9- Playback info
Play/Pause Playback
2. Touch [ ] button to Pause playback.
3. Touch [ ] button to resume playback.
Switch to Previous/next file
Press [ ] or [ ] button during playback to play
previous /next file.
• Pressing [
] button starts playback from the
beginning of the next track.
• Pressing [
] button starts playback from the
beginning of the current track; when this button is
pressed again within about 5 seconds, playback starts
from the beginning of previous track.
Repeat Playback
* The repeat set as the factory default is Repeat Folder.
Touch the [
] button once for Repeat Track, again
for Repeat Folder.
Note: The repeat in all USB files function is not available.
Skip use seek bar
Press the on seek bar and drag it to any position
where you want to start playback.
Switch to USB Video Menu
Press [ ] button playback will be paused, and the
screen will switch to USB Video Menu.
1 2 3 4 5 6
789
NX_NZ501北美版说明书.indd 31 2011-1-19 17:36:23