Clarion NZ501 DVD Player User Manual


 
56 NX501/NZ501
English
Owner’s Manual
TV/VTR (When connecting an optional TV tuner, etc.)
Problem Cause Measure
The image is not
displayed.
The parking brake is not
engaged.
Check that the parking brake is engaged.
The display is dark.
The brightness control is too
low.
Adjust the brightness properly.
The operating condition is
not good.
The temperature inside the vehicle may be 0 or
lower. Set to an appropriate temperature (25 or so)
and check it again.
The headlight of the vehicle
is lit
The display is made dark at night to prevent the
glare (When the headlight of the vehicle is lit in the
daytime, the display gets dark).
When the VTR is
connected, the image is
disturbed.
Improper NTSC/PAL setting
Set the AUTO/PAL/NTSC properly according to the
VTR.
There are red, green, and
blue points in display.
--------------------
This is not a failure, but a phenomenon peculiar
to a liquid crystal panel (The liquid crystal panel is
produced according to technology with very high
precision. Note that, though there are effective
pixels of 99.99% or more, pixel missing or normally
lit pixels account for 0.01%).
24. ERROR DISPLAY
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD PLAYER
Display Cause Measure
Invalid Disc
A disc is caught inside the DVD deck and
is not ejected.
This is a failure of DVD deck’s
mechanism and consult your store
of purchase.
Invalid Disc
A disc cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped disc.
Invalid Disc
A disc is loaded upside- down inside the
DVD deck and does not play.
Eject the disc then reload it
properly.
PARENTAL VIOLATION
Parental level error Set the correct Parental level.
Disc Region incorrect
Region code error
Eject the disc, and replace correct
region code disc.
If an error display other than the ones described above appears, press the Reset button. If the problem persists,
turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.
NX_NZ501北美版说明书.indd 56 2011-1-19 17:36:31