Filter
Top Products
English
Owner’s manual
280-8207-00
VRX756VD 49
3. Touch the desired track name to select.
• The display contents will differ depending
on the item key selected (ARTISTS,
ALBUMS, SONGS, GENRES,
COMPOSERS). The following is one
example:
If [ARTISTS] key is touched:
➜ ARTISTS list is displayed
Touch desired artist name
➜ ALBUMS for that artist are displayed
Touch desired album name
➜ SONGS on that album are displayed
Then touch the desired SONG title to
select.
• When you return to the iPod main menu after
selecting a track, the [BROWSE] key icon will
turn to orange. If you touch the [BROWSE]
key again in this condition, the song title list
will be displayed directly.
• At a list display menu, touching the [Å] key
will cause the display to go back one menu.
•Touching [z] key shows next page. Touching
[w] key goes back to previous page.
•Touching the [ESC] key will cause the display
to return to the iPod main menu.
• The following characters can be displayed.
(space), ! , “ , # , $ , % , & , ‘ , ( , ) , * ,+ , , , - ,
. , / , 0 , 1 to 9 , : , ; , < , = , > , ? , @ , A to Z ,
] , ^ , _ , ‘ , a to z , { , | , } , ~
• is displayed for the characters other than
above mentioned or not Unicode character.
Selecting Tracks from a Play List
1. Touch the [PLAY LIST] key at the iPod main
menu to display the play list menu.
2. Touch a desired play list name on the play
list menu to display the corresponding list of
tracks.
3. Touch the desired track name on the list to
select.
Note:
• The titles on the list menu do not scroll.
This function is available when a VTR, etc. is
connected to the visual terminal.
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and op-
erating the VTR, etc. while driving are pro-
hibited by law in some countries.
Switching to the VISUAL mode
Note:
•For your safety, the VRX756VD has a safety
function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking break is applied.
1. Press the [SOURCE] buton and select the
VISUAL mode.
Changing the audio input level
The visual terminal can be used to change the
input audio level.
∗ The factory default setting is “HIGH“.
1. Touch the screen to display the menu, then
touch the [SUB] key.
2. Touch the [VISUAL AUX SENS] key to select
the level.
HIGH: 16.25 dB
MID: 3.75 dB
LOW: 0 dB
3. Touch the [ESC] key to return to previous
screen.
VISUAL OperationsiPod Operations
+VRX756VD-031-Eng2 05.1.18, 1:01 PM49