Clarion VRX756VD DVD Player User Manual


 
English
Installation and Wire
connection manual
72 VRX756VD
280-8207-00
Connecting the Accessories
Connection to the external amplifier
The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For
detailed information, refer to the instruction manual of the 5.1ch Surround Decoder.
Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to CCD terminal on the tuner amp unit. For detailed
information, refer to the instruction sheet or manual for the CCD camera.
Notes:
•A power supply box (sold separately) is required for connection of the main unit and the CCD camera.
The power supply box for camera CAA147 cannot be used. Please use the CAA188 instead.
If the specified lead of the cellular phone is connected to the phone mute
lead of the source unit, the audio mute is available when the cellular
telephone is used.
TV Tunner
When the TV TUNER is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV TUNER.
Connecting the parking brake lead
Connect the lead to parking brake lamp earth
in the meter panel.
Notes:
Connecting the parking brake lead to lamp earth
allows you to watch TV/VTR/DVD video/video
CD when the parking brake is engaged.
When the parking brake lead is not connected,
the monitor will stay off.
Parking brake
Parking brake lamp
+ lead to battery
Connect these three leads.
- cord
parking
brake signal
lead
Parking brake lead
(bright green)
+VRX756VD-065-Eng-Inst 05.1.18, 1:04 PM72