Filter
Top Products
English
Owner’s manual
280-8207-00
VRX756VD 57
Other Functions
Internal amplifier cancel function
This function is used to disable the internal
amplifier when an external amplifier is
connected.
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button.
2. Touch the [AUDIO EXT.] key.
3. Touch the [AMP CANCEL] key to select “ON”
or “OFF”.
●OFF: Use with the internal amplifier.
●ON: Use with the external amplifier.
4. Touch the [ESC] key to return to the previous
screen.
Triggered audio mute for cellular
telepones
This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
∗ This function is not compatible with all cellular
telepones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
5.1 ch Surround Decoder control function
This function is available when a 5.1 ch
Surround Decoder (DVH940) is connected.
When the 5.1 ch Surround Decoder (DVH940,
sold separately) is CeNET connected, the 5.1 ch
Surround Decoder Control unit (DVC940, sold
separately) cannot be used.
This section describes operation procedures only.
For other details, refer to the owner’s manual
supplied with the 5.1 ch Surround Decoder.
∗ For details on functions of each mode, refer to the
owner’s manual supplied with the DVH940.
∗ Requires an optional amplifier sold separately.
Note:
• The 2-ZONE mode is disabled when the DVH940
is connected.
1. Press the [ADJ] button to show the ADJUST
MODE menu.
2. Touch the [AUDIO EXT.] key.
3. Touch the required keys to make the desired
setting.
●SPEAKER SEL (speaker selection)
This function determines center speaker,
surround speaker and sub woofer connection.
3-1. Touch the [SPEAKER SEL] key to show
the submenu.
3-2. Touch the [CENTER SP], [SURROUND
SP] or [SUB WOOFER] key to turn
speakers on or off depending on what
speakers are connected.
• The factory default setting is “ON”.
• The phase of the “SUB WOOFER” is
reversed in the ON- setting. The default
value is “ON+”.
5.1 ch Surround Decoder
Operations
+VRX756VD-050-Eng3 05.1.18, 1:03 PM57