Clover Electronics LCD22164 DVR User Manual


 
15
3.What to do at the time of
Installation
The system should be installed in the following order;
1. Make sure all the required hardware is available.
- 22” wide TFT-LCD monitor built-in 16 Ch DVR
- Up to 16 cameras capacity (Refer to the retail box for the number of
camera included in the system).
- CCTV monitor or TV set if necessary
- Network cable if connecting to a PC
2. Connect the cameras to the monitor (Refer to Fig 5-3).
4. Confirm if live video is displayed on the monitor before going to the next step.
5. Select the Setup Menu and set current date and time (Refer to Section 7-2.1).
6. Run the FACTORY DEFAULT setting in the SYSTEM menu.
7. Perform HDD formatting.
8. Escape from Setup Menu.
9. Set values for required options.
10. Network cable should be connected to the monitor before turning the power on.
Refer to Fig 5-8 for the cable specification.
3