Filter
Top Products
9. Installation of additional HDDs
165
9-1. HDD (Hard Disk Drive) INSTALLATION
The system manufacturer already installed a large space of Hard Disk Drive (refer to the retail
box for capacity) in the system. Just in case, refer to the following explanation on how to install a
HDD.
▶ The power switch must be turned off before installing and unplug the power cord to prevent
an electric shock that may occur.
▶ Separate the HDD cover by removing two screws on the rear of the system as shown
illustration below.
▶ Attach the HDD to the HDD bracket and install it with four screws as below. Do not securely
fix the four screws so that the HDD moves to the left and the right. Place the HDD with the
bracket in its place inside the system.