Clover Electronics LCD22164 DVR User Manual


 
Stand-alone DVR Instruction Manual
68
6-10.4. Copying the recorded data during replaying
The system, LCD22164 allows users to copy the recorded data during replaying.
Start replaying (See section 6-9).
Right-click on the replaying screen, and the COPY DATA screen will be displayed (See
Fig.6-43).
To set the starting time and date to copy, select the values (year/month/date window
and hour/minute/second) on the COPY DATA window by clicking the mouse, change the
values with the mouse’s wheel and click the mouse again on the changed values to
complete.
Select each of channels (1 through 16 in red) or “A” in black for all the channels on the
COPY DATA window, and then click on the SELECTED button to save.
To set the ending time and date to copy, right-click on the replaying screen again, and
the COPY DATA window that contains end time for copying will be displayed (See Fig.6-
44). Set the ending time and date to copy as described above.
To select the COPY MODE, click on the GO TO COPY button (See Fig.6-44), and then the
COPY window (See Fig.6-38) will be displayed. The time and date (starting time and
ending time) to copy can be changed on the COPY window as well (See section 6-10.2).
[Fig.6-43 Start Copy Time Setup window]