Filter
Top Products
DISPLAY
AUDIO SUBTITLE MUTE
DIGEST
HIDE
BOOKMARK
-
-
CH DVR 1500 DVD PLAYER RECORDER
ON / STANDBY
RETURNENTER
UP
DOWN
PROGRESSIVE SCAN VIDEO
S-VIDEO IN 2 VIDEO IN 2
L
RAUDIO
DVD / TV LIVE
/
/
/
SOURCE
RECORD
Powering on the unit
Plug the appropriate end of the power cord into the unit
first, then plug the standard jack end into a wall socket
or power strip.
3
Press STANDBY on the remote control or front panel to
bring the system out of standby mode. The system is
now ready to use.
1
Only after all connections are complete, connect the power
cord and power on the unit.
AC outlet
100~230V
Use the UP/DOWN keys to increase or decrease the
value of a selected field or move to a field above or
below. Use the LEFT/RIGHT keys to move to the
previous or next fields.
1
Using the Menus
ON / STANDBY
Initial Setup Procedure
When the unit is first powered on, you'll be prompted to set the
time and date as well as TV Tuner options. You can always
change any of the settings you choose during the Initial Setup
later in the DVD Recorder's SETUP MENU.
Turn on the main power switch on the back of the unit.
The unit is now in STANDBY MODE. Once this switch
has been turned on, the unit will always be either ON, or
in STANDBY MODE.
2
Notes on power states
There are 3 power states for this unit:
OFF - The main power switch is turned off. The unit draws
no power and cannot be turned on by the remote control.
STANDBY - The main power switch has been turned ON,
but the unit has not been taken out of standby by pressing
either the STANDBY key on the remote control or the ON /
STANDBY button on the front panel. The unit draws a
slight amount of power to enable the remote control
receiving circuit.
ON - The main power switch has been turned ON, and
either the STANDBY button on the remote control or the
ON / STANDBY button on the front panel has been
pressed. The unit is ready to use.
Press ENTER to select an option and/or continue.
2
Setting the Time and Date correctly is important, since Timer
recordings depend on an accurate setting. The Time format used
is 24HR. This means that 1:00PM will be represented as 13:00,
2:00PM as 14:00, and so on. Use the UP/DOWN keys to
increase or decrease the Time or Date and the LEFT/RIGHT
keys to move to a different field. When you're done, move to
COMPLETED and press ENTER.
Time and Date
Setup Language
You may select English, Spanish or French as the language
used by the Initial Setup Menus. When the player's on-screen
Setup Menu is accessed later by pressing SETUP, this language
will be used as well. Press the UP/DOWN keys to select a
language, then press ENTER to confirm.
Choose English Menus
Choose Spanish Menus
Press <ENTER> to continue
Please set the Time and Date
00:05:10
01/01/00
Completed
15
CH-
CH+
ENTER
The Initial Setup is now complete. Remember, any settings
chosen during the Initial Setup can be changed at any time in
the DVD Recorder's SETUP MENU. Press ENTER to exit the
Initial Setup and begin using your DVD Recorder.
DVD PLAYER OPERATION