Filter
Top Products
THE DVD RECORDER SETUP MENU
37
System Setup
CHANNEL SEARCH
Default setting: CONFIRM
Confirm the Channel Search to automatically scan for available
channels. The unit saves those channels received at sufficient
signal strength. To cancel Channel Search, choose CANCEL.
ADD/DEL CHs
Allows you to manually add or delete channels from the tuner’s
channel list. Press the RIGHT ARROW key for subsequent
pages of channel choices.
CABLE/ANT
Default setting: ANTENNA
Choose your TV connection. The default is ANTENNA, used
with a typical air antenna receiving local stations. If you are
using a Cable TV provider, choose CABLE.
DATE AND TIME
Set the Date and Time used by the unit for Timer Recording
purposes. Use the UP/DOWN ARROW keys to increase or
decrease the Date/Time values and LEFT/RIGHT ARROW
keys to move to a different field. Press ENTER to confirm and
save.
VERSION
Displays information about the unit’s Firmware and Hardware
versions. This information may be asked for by Tech Support
for trouble-shooting purposes.
PARENTAL LEVEL
Default setting: NO LIMIT
The Parental Level allows you to limit the use of your DVD
Player to only those DVD discs that do not exceed the rating
you specify. Choices include G, PG, PG-13, R, NC-17 and
NO LIMIT (All discs play). When the parental level is set,
DVD discs that support Parental Control will play only after
the correct password has been entered. Non-supporting discs,
however, will be “immune” to lockout.
The FIRST TIME you attempt to change the parental level
setting, you are prompted to setup a password. After this, you
will be prompted to enter the password you created in order to
change the parental level. For more info, see PASSWORD,
covered next.
SETUP
Language
Video Setup
Audio Setup
System Setup
Disc Media
Record Mode
Timer Record
SYSTEM SETUP
Channel Search
Add/Del Channel
Cable/Antenna
Date and Time
Version
Parental Level
Password
Factory Reset
Screen Saver
Auto Shutdown
PASSWORD
You must setup a PASSWORD to use the Parental Level
options. When you FIRST attempt to use the Parental Control,
you are prompted to create a NEW PASSWORD. Choose any 5-
Digit number for your password and press ENTER. Enter the
password again to confirm.
After your password is setup, use the PASSWORD menu option
to change your existing password. You will be prompted to
enter the OLD password, then the NEW password twice to
confirm. If you should forget your password, you may use the
MASTER PASSWORD of 98201 in place of the old password.
FACTORY RESET
Default setting: CONFIRM
Use this option to RESET the unit to FACTORY DEFAULTS.
All settings will be reset, including the DATE and TIME. All
stored CHANNELS will be lost. Choose CANCEL to maintain
your settings.
SCREEN SAVER
Default setting: OFF
You can enable the built-in SCREEN SAVER. When enabled by
choosing ON, the Screen Saver will start if the unit remains
paused for a period of about 5 minutes, protecting your TV from
possible “screen burn” that could occur when a still image is
displayed for too long.
AUTO SHUTDOWN
Default setting: OFF
With AUTO SHUTDOWN enabled, the unit will automatically
go into STANDBY mode after a period of about 30 minutes of
inactivity. Choose ON to enable. *This setting requires that the
SCREEN SAVER be enabled.
!
Remember to keep in mind that since the MASTER
PASSWORD is listed above, your player may not be secure if
this manual is accessible by your children.
Note on Parental Security