Filter
Top Products
RECORDING
27
To end recording, press STOP. Keep in mind that the
recording will end automatically if the disc runs out of
space. There will be a pause while the player updates
the disc contents.
3
You may pause the DVD Recorder during a Live
Recording. Simply press PAUSE and the recording will
stop temporarily. Press PAUSE again to resume
recording.
2
To return to the Title Screen, press TITLE. You will see a
thumbnail image representing your last recording, with
information on the details of the recording, including
the Date and Time the recording was made, along with
the Length and Recording Mode.
4
5% free
To begin recording, press the REC button. This will
begin recording without a specific end time.
Alternatively, you can set the end time of the recording
by pressing REC multiple times to cycle through 30
minute intervals. The stop time options will be
dependent on the amount of disc space available, as
well as the record mode (quality) setting.
If you wish to An icon will appear on the screen letting
you know that the recording has begun. The DVD
Recorder's front display will show "REC", followed by
the elapsed time of the recording.
1
Recording
In Live Recording mode, you may record with no specific end
point, or specify the length of the recording - in multiples of 30
minutes - using the REC button.
DVD/TV LIVE
SOURCE
TIMER
REC
REC MODE
EDIT
FRONT PANEL
RECORD
OR
REC
+30 +60
. . .
REC
PLAY
OR
DVD / TV LIVE
SOURCE
FRONT PANEL
CH 44
8:00:00 PM, Jan 2, 2003
Length: 0:30:00 Quality: HQ
INPUT SOURCE
TV
VIDEO IN 1
S-VIDEO IN 1
VIDEO IN 2
S-VIDEO IN 2
INPUT SOURCE
TV
VIDEO IN 1
S-VIDEO IN 1
VIDEO IN 2
S-VIDEO IN 2
Use the UP/DOWN ARROW keys to select an Input
Source, and press ENTER.
3
During playback of a recording, press REC, then REC again to
begin overwriting existing titles from that point. In FIGURE 1
shown below, the recorder is in playback mode. Once REC is
pressed, the player switches to TV LIVE mode, as shown in
FIGURE 2. In FIGURE 3, the remainder of the original title will
be overwritten with a new title by pressing REC again.
Existing titles will also be overwritten depending on the
length of the recording.
Overwriting from a Playback Point
9
9
1
3
2
REC
!
Normally, a live recording is made with the Recorder in TV
LIVE mode and an Input Video Source (such as the TV Tuner
or AV Input) being viewed. In this scenario, a new title is
created for the recording and existing titles are preserved.
Alternatively, you can choose to OVERWRITE existing
recordings on a disc. To do this, press the REC key while the
Recorder is in DVD playback mode. The Recorder will switch
to TV Live mode. Now, press REC again. Using this method,
the playback location or title selection will determine where
the recording will begin and which titles will be overwritten.
Recording Over Existing Titles